KMF Bearings
Radial - and axial needle roller and cage assemblies
Radial needle roller and cage assemblies consist of plastic cage strips for needle rollers, produced to length and filled with rollers.
Seven types of needle roller sizes between 1,5 mm diam. to 12 mm diam. are available, and can be supplied cut to length or in roll to be cut on installation.
The needle rollers (NRB) are contained and guided in the roller pockets and are in accordance with DIN 5402 / ISA 3096.
Cutting to the required diameter for use can be done according to the built-in length with normal cutting equipment, such as pliers, shears etc. The cage end play recommended by the manufacturer should be noted when deciding on the built-in length.
The joint produced in assembly remains open. There is no adverse effect on the operation of the radial needle roller ring and cage assembly due to the open joint.
Click on the links below for full specifications
