Grease and lubricants list
Show all bearing lubricant products
Sort by lubricant manufacturers
Show all Barden bearing lubricants
Show all NHBB bearing lubricants
Show all SKF bearing lubricants
Show all FAG bearing lubricants
Show all INA bearing lubricants
Show all NTN bearing lubricants
Show all KOYO bearing lubricants
Show all Nachi bearing lubricants
Show all MPB bearing lubricants
Show all RMB bearing lubricants
Show all ADR bearing lubricants
Show all NSK bearing lubricants
Show all GMN bearing lubricants
Show all Military bearing lubricants
| Designation | Baseoil | Temp range | Comments |
|---|---|---|---|
| Beacon 325 | Diester | -54°C - 121°C | Good anti-corrosion low torque |
| Rheolube 757SSG | Petroleum | -40°C - 93°C | Anti-oxidation additives, machine tool spindle grease |
| Chevron SR1-2 | Petroleum | -29°C - 150°C | General purpose moderate speed water resistant. |
| Rheotemp 500 | Easter and petroleum | -46°C - 176°C | For high temperature, high speed. Not water resistant |
| Mobil 28 | Synthetic hydrocarbon | -62°C - 176°C | MIL-G-81322, DOD-G-24508 wide temperature range. Dark red colour |
| Krytox 240 AB | Perfluroalkylpolether | -40°C - 232°C | Excellent thermal oxidative stability, does not creep, water resistant and chemically inert. |
| Rheolube 350 SBG-2 | Petroleum | -34°C - 121°C | Spindle bearing grease for normal temperatures and maximum life at high speed. |
| Braycote 601 | Perfluorinated Polether | -73°C - 260°C | Excellent thermal and oxidative stability, does not creep, water resitant, chemically inert. |
| Isoflex NBU-15 | Ester | -40°C - 121°C | Spindle bearing grease for maximum speeds, moderate loads. |
| Asonic GLY32 | Ester/Synthetic Hydrocarbon | -51°C - 150°C | Quiet running spindle bearing grease for moderate speeds and loads. |
| Isoflex super LDS 18 | Ester/Mineral | -51°C - 121°C | Spindle bearing grease for maximum speed and moderate loads |
| Rheolube 2000 | Synthetic Hydrocarbon | -46°C - 127°C | Instrument, general purpose grease with good anti-corrosion and anti-wear properties. Excellent for use in hard vacuum applications where very low outgassing is desired. |
| Unirex N3 | Petroleum | -40°C - 150°C | Spindle bearing grease for moderate speeds and loads. Low grease migration. Good resistance to water washout and corrosion. Low noise |
| Arcanol L-75 | PAO/Ester | -51°C - 121°C | Spindle bearing grease for maximum speeds, moderate loads. Requires shorter run-in time than G-46 |
| Rheolube 374C | Synthetic Hydrocarbon | -40°C - 150°C | Instrument general purpose grease for moderate speeds and loads. Stiff channeling grease with good wear resistance to water washout and corroson. |
| Aeroshell Grease No. 7 | Synthetic Ester (Diester) | -73°C - 149°C | MIL-G-23827 general purpose aircraft and instrument grease for heavy loads. |
| Aeroshell Grease No. 22 | Synthetic Hydrocarbon | -65°C - 204°C | MIL-G-91322 wide temperature range. Good low temperature torque. |
| Asonic GHY72 | Ester Oil | -40°C - 180°C | Quite running grease for moderate speeds and loads. Good resistance to water washout and corrosion. |
| Asonic HQ 72-102 | Ester Oil | -40°C - 180°C | Quite running grease for moderately high speeds and loads. Good resistance to water washout and corrsion. |
| Asonic Q74-73 | Synthetic Hydrocarbon Oil, Esteroil | -40°C - 165°C | Quite running grease for moderate speeds and loads. |
| Winsorlube L-245X | Diester | -54°C - 66°C | Attacks paint, neoprene, anti-corrosion additives MIL-L-6085. |
| Turbo Oil # 2389 | Diester | -54°C - 176°C | Anti-oxidation, additives, MIL-L-7808 |
| SHF-61 | Synthetic hydrocarbon | -54°C - 176°C | Good heat stability, low volatility. |
| Turbo Oil # 2380 | Diester | -54°C - 176°C | Anti-oxidation additives, MIL-L-23699 |
| Synthetic 181B | Synthetic hydrocarbon | -40°C - 150°C | Good heat stability, low volatility. |
| Micronic 815Z | Perfluorinated polyether | -73°C - 260°C | Low surface tension, but does not migrate. |
| Krytox 1506 | Flurocarbons | -51°C - 288°C | Low sirface tension, but does not migrate. |
| Synthetic Oil 2001 | Synthetic hydrocarbon | -46°C - 127°C | Instrument general purpose lubricant,excellent for use in hard vacuum applications where very low out gas properties are desired. |
| Aeroshell Fluid No. 12 | Synthetic Ester | -54°C - 150°C | MIL-L-6085, attacks paint, natural rubber and neoprene. Contains anti-corrosion additives. |
| Nycolube 11B | Synthetic Ester | -54°C - 160°C | MIL-L-6085, Attacks paint, natural rubber and neoprene. Contains anti-corrosion additives. |
| Anderol L465 | Synthetic | -29°C - 232°C | Low out gas properties for wide temperature range. Contains anti-corrosion, anti-oxidation additives and anti-wear additives. |
| Nyosil M25 | Silicon | -50°C - 200°C | Low surface tension, tends to migrate. |
| Anderol 401 D Tenneco | Diester | -50°C - 150°C | MIL-G-6085A. Good general purpose instrument oil. |
| Beacon 325 | Synthetic | -55°C - 120°C | MIL-G-3278A DTD825B NLGI grade 2. Good low torque general purpose grease. |
| ANDOK C | Mineral | -30°C - 120°C | Good long life channeling grease. Low torque after running in period. |
| Low Temp EP | Synthetic | -70°C - 150°C | MIL-G-23827 DTD5598. Good low temperature grease. NLGI grade 2. |
| Versilube F50 | Silicon | -70°C - 150°C | MIL-S-81087. Good low temperature torque instrument oil. |
| Alvania RA | Petroleum | -40°C - 100°C | Good general purpose grease. |
| Chevron SRI-2 | Petroleum | -28°C - 176°C | Good high temperature and water resistance, motor grease. Blue/green colour |
| Krytox 240AC | fluorinated | -35°C - 287°C | MIL-G-27617. Good high temperature grease. Oxygen compatible. Can be used in vacuum envirionments. |
| Krytox 143AC | -35°C - 287°C | Base Oil for LY101 | |
| Multitemp SRL Kyodo Yushi | Diester | -40°C - 150°C | Good low torque, low noise motor grease. |
| Aeroshell Grease No. 15A | Silicon | -73°C - 310°C | Good wide temperature range. Low torque instrument grease. |
| Regal AFB2 | Paraffin | -40°C - 121°C | Green |
| Aeroshell Fluid No. 3 (Oil) | °C - 0°C | ||
| Aeroshell Grease No. 6 | °C - 0°C | ||
| Aeroshell Grease No. 5 | Mineral | -10°C - 130°C | normal temperature grease |
| Aeroshell Grease No. 14 | °C - 0°C | ||
| Aeroshell Grease No. 16 | °C - 0°C | ||
| Aeroshell Grease No. 17 | °C - 0°C | ||
| ANDOK B | Mineral | -40°C - 120°C | Normal temperature grease |
| ANDOCK 260 | Mineral | -40°C - 120°C | |
| ANDEROL L-793 | °C - 0°C | ||
| Alvania EP Grease RO | °C - 0°C | ||
| Alvania EP Grease 1 | °C - 0°C | ||
| Alvania EP Grease 2 | Mineral | -10°C - 100°C | normal temperature grease |
| APL701 (OIL) | °C - 0°C | ||
| APL700 (oil) | °C - 0°C | ||
| Alvania Grease R2 | Mineral | -53°C - 135°C | |
| Alvania Grease R3 | Mineral | -34°C - 135°C | |
| Isoflex Alltime SL2 M183 | °C - 0°C | ||
| Alvania Grease RA | Mineral | -25°C - 120°C | normal temperature grease |
| Alvania Grease RS | °C - 0°C | ||
| Alvania Grease No. 1 | °C - 0°C | ||
| Alvania Grease No. 2 | Mineral | -25°C - 120°C | normal temperature grease |
| Alvania Grease No. 3 | Mineral | -20°C - 135°C | normal temperature grease |
| Aeroshell Grease No. 22 (Oil) | °C - 0°C | ||
| ANDEROL L401D | °C - 0°C | ||
| BARRIERTA L55/2 | Fluorinated | -35°C - 260°C | high-low temperature grease. Creamy white colour |
| BRAY COTE MICRONOK 622 SUPER CLEAN | °C - 0°C | ||
| MOBIL LIFE TIME | °C - 0°C | ||
| MOLYKOTE BR2 PLUS | Mineral | -30°C - 150°C | high speed grease. Black colour |
| DAPHNE CORONEX No. 2 | °C - 0°C | ||
| DARINA-2 | °C - 0°C | ||
| DARINA-R2 | °C - 0°C | ||
| TORAY SILICON SH200-4000cst (oil) | °C - 0°C | ||
| TORAY SILICONE SH33F | °C - 0°C | ||
| TORAY SILICONE SH33L | °C - 0°C | ||
| TORAY SILICONE SH33H | °C - 0°C | ||
| TORAY SILICONE SH44HA | °C - 0°C | ||
| TORAY SILICON SH44F | °C - 0°C | ||
| TORAY SILICONE SH44L | °C - 0°C | ||
| TORAY SILICONE SH44M | °C - 0°C | ||
| TORAY SILICONE SH41 | °C - 0°C | ||
| TORAY SILICONE SH510-50cst (Oil) | °C - 0°C | ||
| MOLYKOTE 55M | °C - 0°C | ||
| Isoflex LDS 18 SPECIAL A | Diester | -60°C - 130°C | low-temperature grease |
| Isoflex SUPER LDS 18 | Mineral/Ester | -60°C - 130°C | Yellow colour |
| 5182 GREASE | °C - 0°C | ||
| FOMBLIN GREASE RT15 | °C - 0°C | ||
| MOLYKOYTE FS-1292 | °C - 0°C | ||
| UNIREX N3 (OIL) | °C - 0°C | ||
| KRYTOX 240 AD | °C - 0°C | ||
| KENDALL KG-80 (OIL) | °C - 0°C | ||
| KRYTOX 280 AC | °C - 0°C | ||
| KRYTOX 260 AC | °C - 0°C | ||
| MULTEMP LRL3 | °C - 0°C | ||
| MOBILUX EP2 | °C - 0°C | ||
| MOBIL DTE OIL LIGHT | °C - 0°C | ||
| MULTINOC No. 2 | °C - 0°C | ||
| MOBIPLEX 47 (OIL) | Mineral | -20°C - 120°C | normal temperature grease |
| MOBILTEMP No. 1 | °C - 0°C | ||
| MULTINOC WIDE No. 2 | °C - 0°C | ||
| MOBILLUX 3 | °C - 0°C | ||
| MOLYKOTE 33M | Silicone | -70°C - 180°C | high-low temperature grease |
| Staburags NBU12 | Mineral | -35°C - 150°C | normal temperature grease |
| Isoflex NBU15 | Diester Mineral | -30°C - 130°C | normal temperature grease |
| Starburags NBU12K | °C - 0°C | ||
| Starburags N12 | °C - 0°C | ||
| Starburags N12 MF | °C - 0°C | ||
| Starburags NBU12/300KP | °C - 0°C | ||
| Starburags NBU30G | °C - 0°C | ||
| NS HI-LUBE GREASE | °C - 0°C | ||
| MULTEMP PS 2A | °C - 0°C | ||
| MULTEMP PS No. 1 | °C - 0°C | ||
| MULTEMP PS No. 2 | °C - 0°C | ||
| MULTEMP PS No. 3 | °C - 0°C | ||
| MULTEMP PS-K | °C - 0°C | ||
| CHEVRON RPM GREASE BRB-2 | Mineral | -28°C - 176°C | Blue/Green colour |
| RONEX MP | °C - 0°C | ||
| RYCON PREMIUM No. 2 | °C - 0°C | ||
| RYCON PREMIUM No. 3 | °C - 0°C | ||
| RYCON PREMIUM No. 1272 | °C - 0°C | ||
| DOLLUM GREASE R SHELL | °C - 0°C | ||
| FETT S7189 | °C - 0°C | ||
| SUPERMIL GREASE N-125 | °C - 0°C | ||
| CHEVRON RPM SRI-2 | Mineral oil | -30°C - 177°C | |
| TEXANDO F020 | °C - 0°C | ||
| UNISLKON TK44 N2 | °C - 0°C | ||
| UNISLKON TK44 N3 | °C - 0°C | ||
| Isoflex TOPAS NB52 | Synthetic hydrocarbon | -60°C - 170°C | high-low temperature grease |
| PREMIUM RB GREASE | °C - 0°C | ||
| Mobilth SHC 100 | Synthetic oil | -40°C - 170°C | high speed grease |
| 1692 LOW TEMP OIL | °C - 0°C | ||
| SUPERMIL GREASE NO. A72832 | Diester | -73°C - 121°C | Amber colour |
| UNIREX LOTEMP EP | °C - 0°C | ||
| UNILUBE DL No. 1 | °C - 0°C | ||
| UNILUBE No. 2 | °C - 0°C | ||
| TEMPREX N2 (UNIREX N2) | °C - 0°C | ||
| TEMPREX N3 (UNIREX N3) | °C - 0°C | ||
| MULTEMP URL No. 3 | °C - 0°C | ||
| UNITEMP GREASE 500 | °C - 0°C | ||
| VERSILUBE F-50 OIL | °C - 0°C | ||
| TERESSO V-79 (OIL) | °C - 0°C | ||
| DEA RENOLIT GA3 - DIN51825-K3K-30 | -30°C - 120°C | ||
| Multitop KP2N-40 | Mineral oil+ester | -40°C - 150°C | Universal grease for ball and roller bearings. Used in rolling mills, construction, machines,motor vehicles,spinning and grinding spindles. Used at increased speeds, high loads, low and high temperatures |
| Multi2 K2N-30 | Mineral oil | -30°C - 140°C | Universal grease for ball bearings OD < 62mm. Used in small electric motors, agricultural and construction machines, household appliances |
| Multi3 K3N-30 | Mineral oil | -30°C - 140°C | Universal grease for ball bearings OD > 62mm. Larger electric motors, agricultural and construction machines, blowers. |
| Load220 KP2N-20 | Mineral oil | -20°C - 140°C | Special grease for ball and roller bearings. Used in rolling mills and rail vehicles. Used in high load, large speed range and high humidity conditions. |
| Load400 KP2N-20 | Mineral oil | -25°C - 140°C | Special grease for ball and roller bearings. Used in mining machines, construction machines. Used in extreme load, medium temperatures and medium speeds. |
| Load1000 KP2N-20 | Mineral oil | -20°C - 140°C | Special grease for ball and roller bearings. Used in mining machines, construction machines. Preferable for shock loads and large bearings. Used for extreme loads, medium temperatures and low speeds. |
| Load1000 KP2N-20 | Mineral oil | -20°C - 140°C | Special grease for ball and roller bearings. Used in mining machines, construction machines. Preferable for shock loads and large bearings. Used for extreme loads, medium temperatures and low speeds. |
| Temp90 KP2P-40 | PAO oil | -40°C - 160°C | Special grease for ball and roller bearings. Used in couplings, eletric motors and motor vehicles. Used in high temperatures and high loads. |
| Temp110 KP2P-40 | Ester oil | -40°C - 160°C | Special grease for ball and Roller bearings.Used in electric machines and motor vehicles. Used in high temperatures and high speeds. |
| Temp120 KPHC2R-30 | PAO/Ester oil | -35°C - 180°C | Special grease for ball and Roller bearings. Used in continuous casting plants. Used at high temperatures and high loads. |
| Temp200 KFK2U-40 | Fluor. poly oil | -40°C - 260°C | Special grease for ball and Roller bearings. Used in track rollers in baking machines, piston pins in compressors, kiln trucks, chemical plants. Used in extremely high temperatures and chemically aggressive environments. |
| Speed2,6 KE3K-50 | PAO/ester oil | -50°C - 120°C | Special grease for ball and Roller bearings. Used in machines tools and instruments. Used at extremely high speeds and low temperatures. |
| VIB3 KP3N-30 | Mineral oil | -30°C - 150°C | Special grease for ball and Roller bearings. Used in rotor blade adjusters in wind power stations, packing machines. Used at high temperatures, high loads, oscillating motion. |
| Bio2 KPE2G-30 | Ester oil | -30°C - 140°C | Special grease for ball and Roller bearings. Used in environmentally hazardous applications. |
| Food2 K2K-30 | White oil | -30°C - 120°C | Special grease for ball and Roller bearings. Used in applications with food contact. USDA H1 |
| ANDOK 260 | Mineral | -30°C - 150°C | Normal Temperature Grease |
| Arapen RB300 | Mineral | -30°C - 100°C | Normal temperature grease |
| Polyrex EM | Mineral | -40°C - 180°C | High temperature, low noise |
| Polyrex EP2 | Mineral | -40°C - 180°C | High temperature, low noise. |
| UNIREX N2 | Mineral | -40°C - 180°C | High temperature. low noise |
| Multemp PS2 | DIESTER | -50°C - 110°C | Low tempaerature grease |
| Multemp SRL | Ester | -40°C - 150°C | Low noise grease |
| Multemp SC-A | Urea | °C - 160°C | Normal temperature grease |
| Multemp ET150 | Urea | -10°C - 160°C | Normal temperature grease. |
| Oneluba | Lithium | -10°C - 110°C | Normal temperature grease |
| Adrex | Lithium | -10°C - 120°C | Normal temperature grease |
| Parmax | Mineral | -10°C - 120°C | Normal temperature grease. |
| Emalube 1130 | Mineral | -10°C - 130°C | Normal temperature grease |
| Unilube DL1 | Mineral | -10°C - 110°C | Normal temperature grease |
| Alumix HD1 | Mineral | °C - 120°C | Normal temperature grease |
| Multemp LTS | Ester | -60°C - 130°C | Low temperature grease |
| Multemp SRH | Ester | -40°C - 150°C | Low temperature grease |
| Multemp SB-M | Synthetic oil | -40°C - 200°C | High temperature, high speed grease. |
| Multemp SC-C | Synthetic oil | -40°C - 200°C | High temperature pump water grease |
| ET-K | Synthetic oil/Ester | -40°C - 200°C | High temperature, high speed alternator grease |
| Isoflex Super TEL | Ester Mineral | -65°C - 70°C | low-temperature grease |
| Isoflex PDB38 CX100 | Ester | -70°C - 120°C | low-temperature grease |
| Barrierta EL | Fluorinated | -50°C - 180°C | high-low temperature grease |
| Barrierta IMI/V | Fluorinated | -50°C - 220°C | high-low temperature grease |
| 5182 | °C - 0°C | ||
| Multemp SI-H | °C - 0°C | Overrunning clutch | |
| Isoflex NCA15 | Ester Mineral oil | -40°C - 130°C | high speed grease |
| Asonic HQ72-102 | Ester | -40°C - 180°C | high-low temperature and low noise grease |
| Petamo GHY133 | Synthetic Mineral oil | -25°C - 150°C | normal temperature grease |
| Petamo GHY443 | Ester | -20°C - 180°C | high temperature longevity grease |
| Molykote 44M | Silicone | -40°C - 200°C | high temperature grease |
| Molykote 55M | Silicone | -55°C - 165°C | low-temperature grease |
| Molykote FS1292 | Phlorosilicon | -40°C - 200°C | high speed grease |
| Molykote FS3451 | Phlorosilicon | -40°C - 230°C | chemicorl and solnent-resisiant grease |
| Molykote EM50L | Synthetic oil | -40°C - 150°C | low noise grease |
| Molykote BG20 | Synthetic oil | -50°C - 180°C | high temperature high speed grease |
| Sunlight 2 | Mineral | -20°C - 120°C | Normal temperature grease |
| Dolium R | Mineral | -20°C - 140°C | Normal temperature grease |
| Aero Shell RLQ2 | Mineral | -50°C - 150°C | low noise high speed grease |
| Mobilux 2 | Mineral | -20°C - 120°C | normal temperature grease |
| Mobil 22 | Dester Mineral | -50°C - 140°C | low-temperature grease |
| Mobilth SHC220 | Synthetic oil | -40°C - 170°C | multiple use grease |
| Mobilitemp SHC22 | Synthetic oil | -50°C - 180°C | high speed high temperature grease |
| Mobi.itemp SHC100 | Synthetic oil | -40°C - 200°C | high speed high temperature grease |
| Krytox 283AC | Perfluor | -35°C - 280°C | high temperature grease |
| Krytox 143AC | fluorinated | -35°C - 280°C | high temperature grease |
| Krytox GPL205 | fluorinated | -36°C - 204°C | high temperature grease |
| Krytox GPL223 | fluorinated) | -36°C - 204°C | high temperature alternator fan clutch bearing grease |
| Krytox GPL224 | fluorinated | -51°C - 179°C | high temperature alternator fan clutch bearing grease |
| Krytox GPL225 | fluorinated | -60°C - 154°C | air pump bearing grease |
| Krytox GPL226 | fluorinated | -36°C - 260°C | CV joint |
| SH44M | Phlorosilicon | -40°C - 180°C | high temperature grease |
| SH33L | Phlorosilicon | -70°C - 140°C | low-temperature grease |
| SH41 | Phlorosilicon | -10°C - 200°C | high temperature grease |
| Versilube G-300 | Silicon | -70°C - 230°C | high-low temperature grease |
| Anderol L-793A | Diester | -60°C - 150°C | low-temperature grease |
| Turmogrease N2 | PAO/Ester | -40°C - 160°C | |
| Lubteksonic BQg | Mineral | -35°C - 150°C | low noise |
| Turmogrease SHL182 | PAO/Ester | -70°C - 130°C | low temperature high speed grease |
| Turmogrease SHL252 | PAO/Ester | -40°C - 120°C | high speed grease |
| Turmoplex TML15 | Ester | -35°C - 160°C | high temperature high speed grease |
| Turmogrease Cx112K | mineral oil/Synthetico | -35°C - 140°C | low noise |
| Turmogrease NBI300 | Synthetic oil | -40°C - 180°C | high temperature high load grease |
| Krytox GPL226 | °C - 343°C | Krytox® GPL 226 is a fluorinated grease for use in high-temperature, aggressive environments. It does not burn, decompose, or react to form gummy or solid deposits | |
| LMX Grease | -30°C - 150°C | Good thermal, water resistance, high load carrying capacity and seperation resistance. Approved by Leyland Bu. fully complies with Timken wheel bearing grease requirements. | |
| Spheerol L-EP 2 | -20°C - 120°C | ||
| Spheerol L-EP 0 | -20°C - 120°C | Good stability, wide temp range, water resisrtance. | |
| Spheerol L-EP 2 | -20°C - 120°C | Good stability, wide temp range, water resistance. | |
| Spheerol L-EP 1 | -20°C - 120°C | Good stability, wide temp range, water resistance. Alterntive to Shell Alvania EP grease 1 or Shell Alvania Grease No 1 | |
| Spheerol SX 2 | Calcium complex | -20°C - 140°C | Strong bond metal surfaces, resistant to sea water and fresh water wash out. Good corrosion protection, wide temp range. Long term stability. |
| Pyroplex Blue NLGI 2 | Lithium Complex | °C - 0°C | Solid lubricant film, extreme pressure resistant, high shear stability, |
| Safecoat 66 | °C - 0°C | Long storage life, Environmentally acceptable. | |
| SLX Grease | Synthetic/Lithium Complex | -40°C - 200°C | Wide temp range, corrosion protection. Alternative to SHELL Aeroshell Grease no 22. |
| Alpha Max 220 | °C - 0°C | ||
| Alpha Max 320 | °C - 0°C | ||
| RLX 40 | °C - 0°C | ||
| RLX Super 40 | °C - 0°C | Excellent oil film between bearings at high operating temperatures | |
| Magna 68 | °C - 0°C | ||
| Magna 220 | °C - 0°C | For bearings, spindles and, using the heavier viscosity grades, mdium loaded gearboxes. | |
| Magna 22 | °C - 0°C | ||
| Magna 2 | °C - 0°C | ||
| Spheerol BM 2 | -7°C - 180°C | High temp stability, high shock load suitability, water resitant and good in fretting or wear situations. | |
| Magna 32 | °C - 0°C | Fine clearance and high speed spindles. | |
| Magna 320 | °C - 0°C | Fine clearance and high speed spindles. | |
| Magna 150 | °C - 0°C | ||
| Magna 100 | °C - 0°C | ||
| Spheerol MP 2 | S Lithium based | -20°C - 110°C | Suited to the lubrication of plain and roller bearings. Alternative to SHELL Alvania Grease RA. |
| Spheerol MP 3 | S Lithium based | -20°C - 110°C | Suited to the lubrication of plain and roller bearings. Alternative to SHELL Alvania Grease NO 3 or SHELL Alvania Grease R3. |
| Running-In Oil 2 | °C - 0°C | ||
| CLS Grease | -45°C - 120°C | Excellent load carrying. Water resistance. Wide temp range. | |
| Spheerol B 2 | S Bentone based | -25°C - 180°C | Good high temp. Corrosion protection. |
| BNS Grease | -25°C - 180°C | Water resistance, high temp stability, anti-corrosive agents. | |
| Rustilo DWX 60 | °C - 0°C | High temp stability, good where volatile solvents are not acceptable. | |
| Rustilo DWX 60 | °C - 0°C | High temp stability, good where volatile solvents are not acceptable. | |
| Optimoly Paste PL | -30°C - 600°C | Low coef of friction, good emergency running properties due to MoS2. Good adhesion, prevents stick slip | |
| Impervia GS | -20°C - 60°C | Water resistance, anti-corrosive properties, economic. | |
| Coral D | °C - 0°C | ||
| Aero AD 100 | °C - 0°C | ||
| Impervia MMO | -18°C - 90°C | Excellent resistance to water washout, good protection against corrosion. | |
| Vitalube GS 320 | -25°C - 150°C | Contains only FDA listed materials, non staining, non toxic, good water replacing properties. | |
| Syntrans AT 75W-90 | °C - 0°C | ||
| Aero AD 80 | °C - 0°C | ||
| Impervia MDX | -7°C - 260°C | Good shock load resistance, water resistance, good adhesive properties. | |
| Ilocut 482 | °C - 0°C | Mineral oil based neat cutting oil with chlorinated additives. Protects against premature dulling and a smooth chip take-off is assured. | |
| Alphasyn EP 220 | °C - 0°C | Corrosion resistance, High viscosity index, Reliable operation even up to 121ºC. | |
| Braycote 601 EF | -80°C - 204°C | Designed to operate in the presence of rocket fuels, oxidisers, and high vacuum. | |
| Alphasyn T 460 | °C - 0°C | Low volatility, does not attack concrete. | |
| Alphasyn T 320 | °C - 0°C | High oxidation stability, high load carrying ability, high natural viscosity | |
| Alphasyn T 220 | °C - 0°C | ||
| Alphasyn T 46 | °C - 0°C | ||
| Alphasyn T 32 | °C - 0°C | ||
| Alphasyn T 68 | °C - 0°C | ||
| Multemp 9B670 | -40°C - 130°C | Good pressure and water resistance | |
| Optitemp TT1 | °C - 0°C | Euiqv to Shell Aeroshell Grease No 7 and TEXACO Low Temp EP. | |
| Optitemp LG2 | °C - 0°C | Alternative to Aeroshell fluid No 12. | |
| Spheerol SX2 | °C - 0°C | Alternative to SHELL Aeroshell grease no.14. Alternate to TEXACO Texando FO20. Alternate to MOBIL Mobilplex 47 (oil). Alternate to ESSO Andok B or Andock 260. | |
| Nucleol G121 | °C - 0°C | Alternative to SHELL APL701 (oil). | |
| Nucleol G110 | °C - 0°C | Alternative to SHELL APL700 (oil). | |
| Spheerol B2 | °C - 0°C | Alternative to SHELL Darina 2. Alternative to SHELL Darina R2. | |
| Optimol Longtime PD2 | °C - 0°C | Alternative to ESSO Andok C. | |
| Firetemp XT2 | °C - 0°C | ||
| Molub Alloy 240 HT | °C - 0°C | Alternative for MOBIL Mobil 28. | |
| Inertox heavy | °C - 0°C | ||
| Optitemp HT 2 | °C - 0°C | ||
| Optitemp HT 2 EP | °C - 0°C | ||
| Olistamoly 2 | °C - 0°C | ||
| Perfecto T 32 | °C - 0°C | Alternative to Mobil DTE oil light. | |
| Spheerol BN 1 | °C - 0°C | Alternative to MOBIL Mobiltemp No 1. | |
| Olista Longtime 3 | °C - 0°C | Alternative to MOLBIL Mobillux 3. | |
| Molub Alloy 214 HT | °C - 0°C | Alternative to MOBIL Temp SHC 100. | |
| LMX | °C - 0°C | Alternative to ESSO Temprex N3 (was Unirex N3) or Temprex N2 (was Unirex N2). | |
| Brayco 601 EF | °C - 0°C | ||
| Synthetic Oil 188B | Synthetic hydrocarbon | -40°C - 125°C | General purpose synthetic hydrocarbon oil. Medium viscosity, plastic compatible, used in precision bearings, low torque applications. Also used in ball and sintered bearing types. |
| Synthetic Oil 605 | Polyol Ester oil | -40°C - 150°C | Automotive superchargers - bearing and gear lubrication. Caution when used near polycarbonate, ABS resin, Buna N and other ester vulnurable plastics and rubbers. |
| UniFlor 8510 | Perfluoropolyether oil | -50°C - 225°C | Light loads, high temperatures, oxidation and chemical resistance qualities. |
| Rheolube 390 | Synthetic hydrocarbon | -54°C - 125°C | Water & salt resistant, synthetic hydrocarbon grease, rust inhibitors. |
| UniFlor 8511R | Perfluoropolyether oil | -50°C - 225°C | Perfluropolyether grease, high temperatures, rust inhibitors, chemical and oxygen resistance. |
| Rheolube 375 | Synthetic hydrocarbon | -54°C - 125°C | General purpose with rust inhibitors |
| Rheolube 716R | Ester | -54°C - 150°C | Quite running, contains additives for higher load capability and rust prevention. Use with care around polycarbonates, ABS resins, Bna N and other ester-vulnurable plastics and rubbers. |
| Rheoplex 6000HT | Ester | -40°C - 180°C | High-speed, high temperature, high load. |
| Rheolube 362F | Synthetic hydrocarbon | -54°C - 125°C | Low starting torque, campatible with plastics and rubbers. |
| NyoGel 744F-MS | Synthetic hydrocarbon | -40°C - 125°C | For heavy loaded applications, lower start up torque, higher than normal adherance characteristics. |
| Rheolube 733F Ultrafiltered | -54°C - 130°C | For precision components, medium consistancy, low noise. | |
| Rheosil 500F | Silicon oil | -40°C - 175°C | Light duty, low load, high speed. |
| Braycote 601EF | Polyether | -73°C - 198°C | |
| Braycote 627S | Ester | -73°C - 149°C | Light brown colour |
| Braycote 637S | Mineral | -53°C - 126°C | Light brown colour |
| Krytox 240AA | Fluor Carbon | -34°C - 232°C | White colour |
| Krytox 240AB | Fluor Carbon | -34°C - 232°C | White colour |
| Krytox 240AC | Fluor Carbon | -34°C - 287°C | White colour |
| Krytox 240AZ | Fluor Carbon | -53°C - 148°C | White colour |
| MOBIL 24 | Silicone | -73°C - 287°C | Reddish colour |
| MOBIL 27 | Carbon | -53°C - 162°C | Tan colour |
| 703A | Mineral | -34°C - 121°C | Tan colour |
| 716B | Polyol Ester | -51°C - 148°C | Tan colour |
| Rheolube 703A | Mineral | -34°C - 121°C | |
| Instrument Grease 706E | Polyol Ester | -53°C - 148°C | |
| Rheolube 716B | Polyol Ester | -51°C - 148°C | |
| Nyogel 781 D (currently replacing Versilube G-300) | Silicone | -70°C - 198°C | |
| Fluoroether 899 RP | PFPE | -90°C - 248°C | |
| Rheolube 2000 | Hydrocarbon | -51°C - 126°C | |
| Rheotemp 500 | Diester | -54°C - 176°C | |
| Rheoplex 6000HT | Ester | -40°C - 150°C | |
| LGU | Synthetic oil | -40°C - 120°C | |
| 76 Unolife Grease | high VI paraffinic | °C - 0°C | Outstanding rust and corrosion protection. Good extreme-pressure and antiwear properties. Excellent wheel bearing life characteristics. Good shear stability. |
| Multemp AC-N | °C - 0°C | Starter Spline, gear | |
| Multemp ETR | °C - 0°C | Starter Spline, gear | |
| Multemp ET Series | °C - 0°C | Alternator + bearings | |
| Multemp FF series | °C - 0°C | Engine sensors | |
| Duplex SP | °C - 0°C | Propeller shaft + universal joint | |
| Multemp CTB | °C - 0°C | Propeller shaft - center bearing | |
| Raremax AF-1 | °C - 0°C | Wheel bearings | |
| One-Luber MK-S | °C - 0°C | Wheel bearings | |
| Molywhite TA | °C - 0°C | Clutch | |
| Molywhite TB | °C - 0°C | Clutch | |
| Multemp AC-N | °C - 0°C | Steering - Tilt telescope | |
| One-Luber SG | °C - 0°C | Steering - Rack & pinion | |
| One-Luber LSG | °C - 0°C | Steering - Rack & pinion | |
| One-Luber MO | °C - 0°C | Steering - Rack & pinion | |
| Multemp SI-B | °C - 0°C | Brake noise control | |
| Multemp AC-R | °C - 0°C | Brake mechanism | |
| Simplex W | °C - 0°C | Chassis | |
| One-Luber MP | °C - 0°C | Chassis | |
| Multemp SL-V | °C - 0°C | Suspension Ball joint | |
| Multemp SA | °C - 0°C | Door hinge | |
| Multemp TA | °C - 0°C | Door hinge | |
| Multemp TAS | °C - 0°C | Door hinge | |
| Molywhite TB | °C - 0°C | Door check | |
| Multemp SL-F | °C - 0°C | Door lock actuator | |
| Multemp L | °C - 0°C | Door lock actuator | |
| Multemp HL-D | °C - 0°C | Steering wheel | |
| Multemp D | °C - 0°C | Seat belt | |
| Multemp AC-D | °C - 0°C | Power mirror | |
| Multemp SH-KII | °C - 0°C | Power mirror | |
| Multemp HL-D | °C - 0°C | Window regulator | |
| Multemp AC-J | °C - 0°C | Power window motor | |
| Multemp SB-M | °C - 0°C | Cooling fan motor | |
| Multemp SW-K | °C - 0°C | Switches | |
| Multemp CE-T | °C - 0°C | Connectors | |
| Raremax SW-1 | °C - 0°C | Connectors | |
| Rykon Premium #2 | Mineral | -23°C - 93°C | colour Reddish |
| Rykon Premium #3 | Mineral | -28°C - 121°C | Pink colour |
| Supermil ASU31052 | Silicone | -73°C - 232°C | Lavender colour |
| Braycote 601EF | Polyether | -73°C - 198°C | Off white |
| Chevron OHT | Mineral | -6°C - 148°C | Greenish colour |
| Chevron NRRG335 | Synthetic/Aeromatic | -53°C - 148°C | Maroon colour |
| Chevron Poly FM #2 | White Oil | -17°C - 160°C | Apricot colour |
| Dow Corning Molykote 41 | Silicone | -17°C - 287°C | Black colour |
| Cosmolube 615 | Silicone | -53°C - 190°C | Light brown colour |
| Kluber Asonic GLY72 | Ester | -50°C - 180°C | Beige colour |
| Mobil BRB 23 | Petroleum | -17°C - 121°C | Tan colour |
| MPB Minapure | Diester | -53°C - 121°C | Light tan colour |
| Royco 13D | Silicone | -73°C - 232°C | Lavender colour |
| Royco 21 | Diester | -73°C - 121°C | Brownish colour |
| Royco 22MS | Diester | -62°C - 182°C | Black colour |
| Royco 27A | Diester | -73°C - 135°C | Brownish colour |
| Royco 37 | Mineral | -53°C - 121°C | Tan colour |
| Royco 64C | Diester | -53°C - 121°C | Black colour |
| Anderol 753A | Diester | -40°C - 148°C | Light brown colour |
| Anderol 757 | Diester | -40°C - 148°C | Light brown colour |
| Anderol 761 | Diester | -40°C - 204°C | Light brown colour |
| Anderol 793A | Diester | -53°C - 148°C | Light brown colour |
| Anderol 794 | Diester | -53°C - 121°C | Light brown colour |
| Anderol 795 | Diester | -53°C - 148°C | Off white |
| Unitemp 500 | Diester | -53°C - 176°C | Blue colour |
