SEND AN ENQUIRY

IMCRE

UNASIS Cam Follower and Yoke Roller Bearings are designed and manufactured to the highest possible quality. These bearings offer an economic solution to industry standard principle dimensions, so they are interchangeable and readily available. Improvements have been made so you can enjoy better performance and a longer operating life.

 

The IMCRE range has a cage which evenly spaces the needles during operationt and an eccentric collar for easier and more accurate positioning.

 

Please review the product table below to find the best bearing for your application. If you require further assistance, please reach out to our bearing engineers for tailored support. 


Product Details

Size Sealed Bearing Part Number  A - Roller OD B - Roller Width C - Stud Dia. D - Stud Length E - Thread Length F - Thread Class G - Oil Hole Centre H - Oil Hole Dia. J - Lube   Fitting Size
mm   mm mm mm mm mm   mm mm  
16 IMCRE-16-SB 16 11 7 9 16 9 M6X1 - 0.6
19 IMCRE-19-SB 19 11 9 11 20 11 M8X1.25 - 0.6
22 IMCRE-22-SB 22 12 10 13 23 12 M10X1 - 0.6
26 IMCRE-26-SB 26 12 10 13 23 12 M10X1 - 0.6
30 IMCRE-30-SB 30 14 11 15 25 14 M12X1.5 3 0.6
32 IMCRE-32-SB 32 14 11 15 25 14 M12X1.5 3 0.6
35 IMCRE-35-SB 35 18 14 20 32.5 18 M16X1.5 3 0.8
40 IMCRE-40-SB 40 20 16 22 36.5 19 M18X1.5 3 0.8
47 IMCRE-47-SB 47 24 18 24 40.5 21 M20X1.5 4 0.8
52 IMCRE-52-SB 52 24 18 24 40.5 21 M20X1.5 4 0.8
62 IMCRE-62-SB 62 29 22 28 49.5 25 M24X1.5 4 0.8
72 IMCRE-72-SB 72 29 22 28 49.5 25 M24X1.5 4 0.8
80 IMCRE-80-SB 80 35 29 35 63 32 M30X1.5 4 1
85 IMCRE-85-SB 85 35 29 35 63 32 M30X1.5 4 1
90 IMCRE-90-SB 90 35 29 35 63 32 M30X1.5 4 1

*The standard UNASIS metric cam-follower comes with hexagonal head with hex-port, seals and crowned outer roller diameter.                                        
*Cylindrical roller surface is available, include and "X" suffix in the part number e.g. IMCRE-62-X, IMCRE-62-SX, IMCRE-62-SBX, please refer to the part numbering section.                                        
 

Size Sealed Bearing Part Number  Corner  Radius Clamping Dia. Min Clamping Torque Max Speed -Grease Speed - Oil Dynamic Load Rating Static Load Rating Mass
mm   mm mm Nm rpm rpm N N kg
16 IMCRE-16-SB 0.3 11 3 19500 25000 4120 4120 0.018
19 IMCRE-19-SB 0.3 13 8 15500 20000 4510 5000 0.028
22 IMCRE-22-SB 0.5 15 15 13500 17500 6280 7260 0.043
26 IMCRE-26-SB 0.5 15 15 13500 17500 6280 7260 0.055
30 IMCRE-30-SB 1 19 22 9600 12500 8240 9710 0.087
32 IMCRE-32-SB 1 19 22 9600 12500 8240 9710 0.096
35 IMCRE-35-SB 1 24 57 6300 8000 13040 19030 0.166
40 IMCRE-40-SB 6 27 85 5000 6400 15990 23730 0.245
47 IMCRE-47-SB 8 30 118 3900 5000 21280 35700 0.387
52 IMCRE-52-SB 8 30 118 3900 5000 21280 35700 0.453
62 IMCRE-62-SB 8 38 216 3100 4100 31680 55700 0.801
72 IMCRE-72-SB 8 38 216 3100 4100 31680 55700 1.039
80 IMCRE-80-SB 8 51 441 2200 2900 56000 105030 1.621
85 IMCRE-85-SB 8 51 441 2200 2900 56000 105030 1.793
90 IMCRE-90-SB 8 51 441 2200 2900 56000 105030 1.981

*Limiting Speeds shown in the table above should be used as a guideline only as each individual application and load scenario will vary. The figures given assume bearings operating within optimal conditions only.                                      
*Clamping torque is based on dry threads only. If the threads are lubricated, use half the values shown.                                    
 

Ask a Question?

Please get in touch with our Sales Engineers to discuss your technical requirements.

Get In Touch
First Name*
Last Name*
Email*
Telephone
Company
Territory*
Message*
I want to receive latest news, product updates, discounts & offers from Carter Manufacturing via:

Choose your Location: