The Unasis Breakaway Torque Wrench can be used for a v-groove or chamfered bearing with any housing arrangement. The tool is precision engineered to suit the inside diameter of the bearing; therefore, a single tool can measure the torque of a wide range of different bearings. The design ensures there is no possibility of damaging the bearing as an interference fit is used to lock the bearing in place rather than more destructive forces. The breakaway torque wrench simple fits on breakaway torque tool, initiates rotation of the bearing and outputs an accurate reading of the peak or breakaway torque value.
Some common wrench sizes:
- IPBT-WRENCH-0.5N-X
- Digital Torque Reader Calibrated 0.002 - 0.5 N-m (0.020 - 4.5 lb-in)
- IPBT-WRENCH-0.5N
- Digital Torque Reader Calibrated 0.05 - 0.5N-m (0.45 - 4.50 lb-in)
- IPBT-WRENCH-4N
- Digital Torque Reader Calibrated 0.4 – 4 N-m (3.5 - 35 lb-in)
- IPBT-WRENCH-4N-X
- Digital Torque Reader Calibrated 0.02 – 4 N-m (0.2 - 35 lb-in)
- IPBT-WRENCH-30N
- Digital Torque Reader Calibrated 1.5 - 30 N-m (13.3 - 265.52 lb-in)
Other calibration ranges available upon request.