SEND AN ENQUIRY

IMYR

UNASIS Cam Follower and Yoke Roller Bearings are designed and manufactured to the highest possible quality. These bearings offer an economic solution to industry standard principle dimensions, so they are interchangeable and readily available. Improvements have been made so you can enjoy better performance and a longer operating life.

 

The IMYR range has a cage which evenly spaces the needles during operation.

 

Please review the product table below to find the best bearing for your application. If you require further assistance, please reach out to our bearing engineers for tailored support. 


Product Details

Size Unsealed Bearing Part Number  Sealed Bearing Part Number  A - Roller OD B - Bore Dia. Min B - Bore Dia. Max C - Roller Width D - Total Width Min D - Total Width Max Corner Radius
mm     mm mm mm mm mm   mm
5 IMYR-5 IMYR-5-S 16 4.992 5 11 12 11.82 0.3
6 IMYR-6 IMYR-6-S 19 5.992 6 11 12 11.82 0.3
8 IMYR-8 IMYR-8-S 24 7.992 8 14 15 14.82 0.5
10 IMYR-10 IMYR-10-S 30 9.992 10 14 15 14.82 1
12 IMYR-12 IMYR-12-S 32 11.992 12 14 15 14.82 1
15 IMYR-15 IMYR-15-S 35 14.992 15 18 19 18.79 1
17 IMYR-17 IMYR-17-S 40 16.992 17 20 21 20.79 1.5
20 IMYR-20 IMYR-20-S 47 19.99 20 24 25 24.79 1.5
25 IMYR-25 IMYR-25-S 52 24.99 25 24 25 24.79 1.5
30 IMYR-30 IMYR-30-S 62 29.99 30 28 29 28.79 1.5
35 IMYR-35 IMYR-35-S 72 34.988 35 28 29 28.79 2
40 IMYR-40 IMYR-40-S 80 39.988 40 30 32 31.75 2
45 IMYR-45 IMYR-45-S 85 44.988 45 30 32 31.75 2
50 IMYR-50 IMYR-50-S 90 49.988 50 30 32 31.75 2

*Cylindrical roller surface is available, include and "X" suffix in the part number e.g. IMYR-62-X and IMYR-62-SX, please refer to the part numbering section.                                    
*The standard UNASIS metric yoke roller comes with seals and crowned outer roller diameter.

 

Size Unsealed Bearing Part Number  Sealed Bearing Part Number  Shaft Diameter - Loose Fit for Light Loads (g6) Shaft Diameter - Loose Fit for Light Loads (g6) Shaft Diameter - Light Transition Fit for Medium Loads (h6) Shaft Diameter - Light Transition Fit for Medium Loads (h6) E - Clamping Dia. Min Speed -Grease Speed - Oil Dynamic Load Rating Static Load Rating Mass
mm     Min (mm) Max (mm) Min (mm) Max (mm) mm rpm rpm N N kg
5 IMYR-5 IMYR-5-S 4.988 4.996 4.992 5 11 19500 25000 4120 4120 0.011
6 IMYR-6 IMYR-6-S 5.988 5.996 5.992 6 13 15500 20000 4510 5000 0.018
8 IMYR-8 IMYR-8-S 7.986 7.995 7.991 8 16 12500 16000 6860 7750 0.04
10 IMYR-10 IMYR-10-S 9.986 9.995 9.991 10 19 9600 12500 8240 9710 0.06
12 IMYR-12 IMYR-12-S 11.983 11.994 11.989 12 21 8100 10500 8730 10890 0.067
15 IMYR-15 IMYR-15-S 14.983 14.994 14.989 15 24 6300 8200 13040 19030 0.102
17 IMYR-17 IMYR-17-S 16.983 16.994 16.989 17 27 4900 6400 15990 23730 0.15
20 IMYR-20 IMYR-20-S 19.98 19.993 19.987 20 30 3900 5000 21280 35700 0.252
25 IMYR-25 IMYR-25-S 24.98 24.993 24.987 25 36 3300 4300 22950 41780 0.278
30 IMYR-30 IMYR-30-S 29.98 29.993 29.987 30 44 2500 3200 34030 65120 0.465
35 IMYR-35 IMYR-35-S 34.975 34.991 34.984 35 52 2200 2800 38930 72960 0.636
40 IMYR-40 IMYR-40-S 39.975 39.991 39.984 40 58 1900 2400 49720 94440 0.825
45 IMYR-45 IMYR-45-S 44.975 44.991 44.984 45 63 1800 2300 51190 101010 0.901
50 IMYR-50 IMYR-50-S 49.975 49.991 49.984 50 68 1600 2000 54720 113570 0.96

*Limiting Speeds shown in the table above should be used as a guideline only as each individual application and load scenario will vary. The figures given assume bearings operating within optimal conditions only. 

 

Ask a Question?

Please get in touch with our Sales Engineers to discuss your technical requirements.

Get In Touch
First Name*
 
Last Name*
 
Email*
 
Telephone
Company
Territory*
 
Message*
 
I want to receive latest news, product updates, discounts & offers from Carter Manufacturing via:

Choose your Location: