First Name*
 
Last Name*
 
Email Address*
 
Telephone
Territory*
 
Message*
 
Get In Touch

SMC

UNASIS Cam Follower and Yoke Roller Bearings are designed and manufactured to the highest possible quality. These bearings offer an economic solution to industry standard principle dimensions, so they are interchangeable and readily available. Improvements have been made so you can enjoy better performance and a longer operating life.

 

The SMC range has a full complement needle arrangement to maximize load capacity and offers corrosion resistance characteristics due to the Stainless Steel construction.

 

Please review the product table below to find the best bearing for your application. If you require further assistance, please reach out to our bearing engineers for tailored support. 


Product Details

Size Sealed Bearing Part Number  A - Roller OD B - Roller Width C - Stud Dia. D - Stud Length E - Thread Length F - Thread Class G - Oil Hole Centre H - Oil Hole Dia. J - Lube   Fitting Size
mm   mm mm mm mm mm   mm mm  
13 SMC-13-SB 13 9 5 13 7.5 M5X0.8 - - 3.1
16 SMC-16-SB 16 11 6 16 9 M6X1 - - 4
19 SMC-19-SB 19 11 8 20 11 M8X1.25 - - 4
22 SMC-22-SB 22 12 10 23 12 M10X1 - - 4
26 SMC-26-SB 26 12 10 23 12 M10X1 - - 4
30 SMC-30-SB 30 14 12 25 14 M12X1.5 6 3 6
32 SMC-32-SB 32 14 12 25 14 M12X1.5 6 3 6
35 SMC-35-SB 35 18 16 32.5 18 M16X1.5 8 3 6
40 SMC-40-SB 40 20 18 36.5 19 M18X1.5 8 3 6
47 SMC-47-SB 47 24 20 40.5 21 M20X1.5 9 4 8
52 SMC-52-SB 52 24 20 40.5 21 M20X1.5 9 4 8
62 SMC-62-SB 62 29 24 49.5 25 M24X1.5 11 4 8
72 SMC-72-SB 72 29 24 49.5 25 M24X1.5 11 4 8
80 SMC-80-SB 80 35 30 63 32 M30X1.5 15 4 8
85 SMC-85-SB 85 35 30 63 32 M30X1.5 15 4 8
90 SMC-90-SB 90 35 30 63 32 M30X1.5 15 4 8

*The standard UNASIS metric cam-follower comes with hexagonal head port, seals and crowned outer roller diameter.                                        
*Cylindrical roller surface is available, include and "X" suffix in the part number e.g. SMC-62-X and SMC-62-SBX, please refer to the part numbering section.    

 

Size Sealed Bearing Part Number  A - Roller OD B - Roller Width C - Stud Dia. D - Stud Length E - Thread Length F - Thread Class G - Oil Hole Centre H - Oil Hole Dia. J - Lube   Fitting Size
mm   mm mm mm mm mm   mm mm  
13 SMC-13-SB 13 9 5 13 7.5 M5X0.8 - - 3.1
16 SMC-16-SB 16 11 6 16 9 M6X1 - - 4
19 SMC-19-SB 19 11 8 20 11 M8X1.25 - - 4
22 SMC-22-SB 22 12 10 23 12 M10X1 - - 4
26 SMC-26-SB 26 12 10 23 12 M10X1 - - 4
30 SMC-30-SB 30 14 12 25 14 M12X1.5 6 3 6
32 SMC-32-SB 32 14 12 25 14 M12X1.5 6 3 6
35 SMC-35-SB 35 18 16 32.5 18 M16X1.5 8 3 6
40 SMC-40-SB 40 20 18 36.5 19 M18X1.5 8 3 6
47 SMC-47-SB 47 24 20 40.5 21 M20X1.5 9 4 8
52 SMC-52-SB 52 24 20 40.5 21 M20X1.5 9 4 8
62 SMC-62-SB 62 29 24 49.5 25 M24X1.5 11 4 8
72 SMC-72-SB 72 29 24 49.5 25 M24X1.5 11 4 8
80 SMC-80-SB 80 35 30 63 32 M30X1.5 15 4 8
85 SMC-85-SB 85 35 30 63 32 M30X1.5 15 4 8
90 SMC-90-SB 90 35 30 63 32 M30X1.5 15 4 8

*Limiting Speeds shown in the table above should be used as a guideline only as each individual application and load scenario will vary. The figures given assume bearings operating within optimal conditions only.                                      
*Clamping torque is based on dry threads only. If the threads are lubricated, use half the values shown.                                    

Ask a Question?

Please get in touch with our Sales Engineers to discuss your technical requirements.

Get In Touch

Get In Touch

For more information, please call us today on +44 (0) 1865 821 720 or +1 888 501 5444
First Name*
 
Email*
 
Company
Last Name*
 
Telephone
Territory*
 
Message*
 
I would like to receive marketing from Carter Manufacturing via: